itsartflex

Magnets-Batch-02 (June Bonus)

Hello Everyone!

Posting June Bonus 2nd batch of Magnets.
Magnet Size - 10x3mm
- 0.16mm layer height
- 3 walls with a 0.4mm
- 12% Infills (Gyroid)
- Use brim or raft for better print adhesion
- Do not downscale (obviously)

Printed on P1P, all three magnets took around 1.5 hr to print.

Link to June Designs Below
2023-07-01 09:24:30 +0000 UTC View Post

Little Babies (June Design) (Patreon Exclusive)

Happy to introduce a new theme called "Littles"! These small designs are quick to print. It took about 1.5 hours to print one model on my K1, using a layer height of 0.14mm and 2 wall counts. I hope you will enjoy printing this design. I would love to see it printed in multi-material!

AMS Optimised Design (Quick to paint with Bambu Studio Fill Tool)

You can find more designs and up...

Final Fix of Sidewinder Snake

Dear Patreons,

I sincerely apologize for any inconvenience caused by the previous issues with the sidewinder snake, specifically regarding the rattling mechanism. I am pleased to inform you that I have successfully addressed all the issues and thoroughly tested the final fix of Rattle. It now operates flawlessly, providing just the right amount of tension.

I am truly grateful for al...

Assembling Sidewinder Tutorial

Assembling Sidewinder Rattle Snake Tutorial :P

Updated the file under June Designs
Rattle - Increased the wall thickness this now holds 3 wall count @ 80% Scale
Head - Increased surface area now holds well with bed (I still recommend using Rafts)

Download file ArtFl...

Update on Sidewinder Rattle and Head

Hi everyone,

I have received feedback regarding the Head component, mentioning that it is detaching from the print bed. To address this issue, I plan to increase the surface area in contact with the bed, which should resolve the problem. Additionally, I recommend using rafts as they provide increased surface area for better print adhesion.

Regarding the Rattle component, feedbac...

Sidewinder Rattlesnake

Hey everyone,

I'm excited to announce the release of my new STL design of a Sidewinder Rattlesnake! I enjoyed working on this design, and I hope you enjoy it too. This model is designed to be printed without supports and has snap-fit joints for the head and rattles. The jaw and body joints may require a little force to snap together. The design also has a working rattle and an openable he...

Cooking Something Special

Hello Everyone,
I can't hold myself to share a part of our upcoming Design with all of you, Hit this part on your print bed with 3 wall count and 12% gyroid infill, and let me know how it sounds :D
Oh, Yeh! I am sharing this Piece with my Patreon Followers to test it out as well!  

Enjoy! 

Say Cheese! Early release of Baby Giraffe(June Design)

                                  -----------------Update-----------------
1. Fixed Head wobbles by increasing the neck and head angle, Now the neck and head will be more stable.
2. Fixed head overhang is...

Cults3D Secret Listing

The post includes old Patreon-exclusive designs and will be updated as new designs are added. You can find the link to download them in the attached text file. After one month, the upcoming exclusive designs will be moved to a secret listing on Cults3D. Therefore, we kindly request Patreon members to download the files as soon as possible. After one month, the exclusive designs will be availabl...

June Designs

Upcoming designs for June month will be uploaded in this Post

1. Baby Giraffe 

Flexi Macaw (May Design) (Patreon Exclusive)

Update - 03-06-2022
Added Ball joint version for more oversized Prints, Ball joint of wings are snap to fit.
it is advised to use at least 3 wall count and 12 percent infills on ball joint wings.
additionally, the ball joint version has an extra feather 🦜
-------------------------------------------
Hello Everyone,

Finally, here we go with our parrot, and my wife correcte...

Update on Articulated Parrot

Hello everyone,

I hope you are doing great. I am providing an update on our Articulated Parrot, which has been in the testing stage for the past few days. I am happy to inform you that the model is now working great.

Previously, I had tested the ball joint for separating the wings, but it did not work as expected. I have now switched back to the chain joints, and the design is funct...

Flexi Parrot Sneak peek

Hello Everyone,
Introducing May's new design Flexi Parrot, I am Pretty excited about this one and This will take some time to finalize, right now I am fixing the joints and will start testing by tomorrow.
I will try my best to deliver this as early as possible.

I hope you are going to love it  🥰

Reminder

Hello Everyone

March Designs are going to be Archived soon, Please download ASAP!
---------------Link --------------

Baby Gecko Articulated

Hello Everyone, I hope you are doing great,

I am super excited to share our new design Flexi Baby Gecko That is a print-in-place design and does not require support. you can print the tail separately and swap between short and long tails. (If you are downscaling Please Keep in mind to remember the scale)


There are two versions,
1. Baby_Gecko_Smooth
2. Baby_Gecko_Textured...

Baby Gecko (Sneak peek)

Hello everyone,
I hope you are doing well ☺️
Our Upcoming Design Baby Gecko is in progress.
So far it is coming fine.
Increasing a bit more flexibility of this design in the next iteration.
This will be available to download in a couple of days 😊🤟🙏

Thank you for your support everyone ❤️ 🙏

of course, I will make the long tail as well 😉

Flexi Baby Hippo

Hello everyone,

I am happy to introduce a new design, the Flexi Baby Hippo. This is a print-in-place design that requires no support, and the head is a snap-to-fit.

Please note the following guidelines when printing this design:

• Do not downscale the model too much (100% > 80%)
• Print with a minimum of 3 wall counts.
• It is recommended ...
  2023-05-01 19:08:41 +0000 UTC View Post

May Designs

Blank Post for May Designs

1. Flexi Baby Hippo
2. Baby Gecko
3. Flexi Macaw (Fixed Pre painted version)(Added Ball joint version for bigger print)

Baby Hippo Sneak Peek

Sneak Peek of our Next design Baby Hippo
Right now in the testing phase on Print Bed 

Magnets First Batch

Update 04-05-2023 - Fixed Dino Magnet teeth overhang issue - Download

----------------------------
Hello Everyone,
Here we go with the first batch of Magnets.
Use super glue to stick the magnet inside the hole
Magnet Hole - 11x3 mm

More magnets Coming in May...

Flexi Dino Skeleton April Design (Archived)

Hello everyone,

I am super excited to announce that after a lot of testing, our April design, the Flexi Dino Skeleton, is now ready to be printed on your 3D printer. I would like to extend a special thank you to all of you for supporting me and testing out this design. I really appreciate your feedback, and I have tried my best to incorporate it into the final version.

I hope you wi...

Curious to know

How do you found ArtFlex ? 

Sneak Peek Flexi Dino Skeleton

Hello Everyone,
Happy to introduce the new design Flexi Dino Skeleton.
Right now I am in the testing phase of this design.

Please let me know in the comments if anyone is interested to test this Design.
Note - Keep in mind this is the first iteration of this design and print may fail.
Do Not Downscale

2023-04-17 17:08:47 +0000 UTC View Post

Articulated Spider Updated (March Design)(Archived)

Hello everyone,

Great news!
Our spider emerged victorious in the battle of strong articulation and has regained its two lost legs, making it now an eight-legged creature. You can download the latest version of the design from the link below,

Oh Yeh I included the non-mechanism design as well.

Happy 3D printing!

2023-04-11 15:54:24 +0000 UTC View Post

Articulated Cat April Design (Archived)

Hello everyone,

I am excited to announce that our Flexi cat design is now available to hit on your printer. The design includes two patterns.
Of course pre-painted versions as well for both patterns 😊

To ensure a quality print, I recommend using a minimum of 3 wall counts and good bed adhesion by using a brim or rafts. Please set your printing speed to 60mm/sec and adjust as n...

Your New Desk Companion Flexi Cat Sneak Peek

Hello everyone,

I hope you are doing well. I am thrilled to share a sneak peek of our upcoming design, the Flexi Cat. This new design will be available soon as part of our April collection.

Happy 3D printing!