Just a quick edit of an older baby for fun, put the new V6 head on him, new robe, bashed the pod up a bit flipped his arm and added the bog roll. This model isn't meant to mock the current situation, I understand people have relatives that are either possibly sick or at risk, or can't buy any toilet paper because its being hoarded... but sometimes we all just need a laugh when thing...
2020-03-18 04:16:50 +0000 UTC View Post
This was going to be a 3 piece print but the supports were a bit stupid so it became a 4 piece print as per the second picture. Supports required yes but not many, scale as you see fit. Enjoy.
instructions: * Glue Parts 1+2+3 together, Part 4 is free spinning.
Just my contribution to the Coronavirus. Supports required, split and unsplit supplied.
2020-03-14 10:54:33 +0000 UTC View Post
Meh, why not another quick one for the weekend, Barry needed a friend and I know a few people were asking for him. I know most of us will be spending alot of time indoors to avoid the dreaded corona... so i'll try and keep us occupied as best I can :)
Happy printing, stay safe and try and have a great weekend ! its blowing a storm here so i'll be nailing down the hatches myself.
Print Challenge March!
Sorry for the delay. I made this too hard, the bee was just too small..
Everything has been scaled to a point where its printable - but you can scale up or down, it is entirely up to you. There is a 4 piece cut base supplied also for those that cant print the base in one hit, all other parts will fit on an Ender or above, obviously scale down for S...
Main Snail at supplied size should not need supports at all and minimal infill (just give him alot of top layers for the rounded top of the eyes and shell)
Spoiler as separate print so it's a little easier as that does need some supports but easy print
Enjoy :)
Just felt like doing a random sunday afternoon sculpt, feel free to hate it, laugh at it etc it's just probably more useful being printed than sitting here on my hard drive :) so for random monster fans, enjoy :)
*Fixed missing hole in bottom left cheek.
Printing Tips
- Generate support from PLATFORM ONLY, otherwise you will have supports inside the toothpick channels.
- Infill must be above 10% (I recommend 15-20%infill for the best internal support for the channels)
Enjoy :)
**Added pen holder version also, 12mm hole
This one was posted in the Discord requests and I figured it was pretty quick and easy and didn't really need to go to the polls and i'd seen it some time back and thought then I should have a crack, so here is my version anyway.
I did plan this to be support free but when angled it to cut the base the head went out, so there is a very ve...
This is a close-ish realization of the Sideshow collectibles figure. It's a little more cartoony than they have, and honestly it wasn't for me not trying, it's just how he came out.
This upload is Scaled to 1:1 measuring 42cm/12.5in approx high it includes separate base/head/hands and separate heads for smooth eyes, Iris detail eyes and also empty eye sockets with 4mm spherical inserts. ...
This update is to cover some very very frequently asked questions and give me a central location to direct people who miss this post.
Q). Why am I seeing Locked posts?
A). This is a Patreon Bug. This is displaying OLD posts from my OLD tiers and show as locked to people in NEW Tiers (ie all of you)
If you do see a post that...
IMPORTANT - READ ME!!!!! (!!!!) (AS IN... THIS IS THE REALLY IMPORTANT PART!)
THE EMAIL ADDRESS YOU SIGN UP WITH ON THE MEMBER DEPOT (WHICH IS OUTLINED BELOW) MUST BE THE SAME AS THE EMAIL ADDRESS YOU USE HERE. IF IT IS NOT THE SAME EMAIL AS HERE, YOUR ACCOUNT WILL NOT BE ACTIVATED AND YOU WILL NOT BE ABLE TO DOWNLOAD FILES.
<...
I like my Flash, used to watch it as a kid, was stoked when they brought back the 80's John shipp Flash for an extended cameo too... theyve gone a little off track lately I think tho..
I had only done a zoom bust previously and not Barry himself so I knocked a quick one up :) Happy Printing.
(no supports required)
Just something left of field for those that are into tabletop miniatures, I do plan on doing a fair few random minis as more and more of us get SLA machines (they are becoming cheaper than FDM!)
2x brick bases
8 x earth/rock bases
23 x tech bases
File is large as each one is High res and about 10mb each.
Enjoy!
**Update 3/3/2020
Have added additonal cuts for Rider lower torso and also Bike Part 6 to fit on SLA printers
**Update 1/3/2020**
Have included a SpeederBike_P1_CutVersion for the speederbike and also a cut tree support version (see slicer image added above)
*******
3 Diorama options included, please see assembly pictures in the Base folder for the othe...
***Edit/Update****
Patreon did big site update, it is possible these new posts are very old ones for an old Tier - but please everyone remember you have access to those older models anyway.... so all I need to do is track down what these 4 mysterious posts are and repost them
*******************
Hi everyone! I have many models that are finished and ready to upload ...
I'm trying to keep these quick so I can get up some practice for the Avengers statue which is being Assembled (pun intended) . I've gone slightly higher resolution on this one so it comes out nice on SLA machines also (since so many of us have elegoo's and SLA's now I'll try and get things out in as high resolution as possible - well as high as I can without blowing the size of the STL's ...
2020-02-16 22:19:16 +0000 UTC View Post
This is a support free mask that fits on an ender or above size printer. It is sized for a medium sized face so please look in your slicer at the scale before printing and measure /scale accordingly.
The base is not much but with a raft/brim you should be able to print this mask completely support free.
Just throwing this one up quickly, I did plan on doing more for Valentines sorry, just too many other models happening and I sort of was stuck for ideas for V day items.. (the other box I went a bit nuts on)
This one didn't really make the cut but once I rendered it in the nice green I thought it might be ok, but i'll let you guys decide, I figured with the print orientation layer...
**Edit - remainder of parts uploaded, instruction manuals included in .zip
This post will continue to be updated as time goes on, so these files will not be moved to the archive until it is built/tested/working
This is the First update for this post, the rest of the parts are being added but once each assembly manual is done ill upload it with the parts over the course of the ...
Ok, so the following are the results of the polls, and below that are how I propose to attack them.
Droids and Bots Poll Winner:
Gatekeeper Jabbas Palace
Cosplay Poll Winner:
Heavy Mandalorian Armor
TV and movie Props Poll Winner:
Dl-18 Heavy Blaster
Lifesize Print Poll Winner:
ROTJ Speed...
I love cats, and Dragonball so Beerus was a no brainer :) happy with how he turned out, starting to get my head around DOF planes to get my renders to look a little sexier, just another thing you have to sit down and practice until you get it right!
This post marks the first model since we amazingly hit our goal of 1000 patrons this morning! thanks to everyone who has been a part o...
My internets back up so trying to get everything up asap, this was one that should have gone up some time ago I actually did it before the mandalorian one I released , its scaled to a normal mando size helmet but I was more thinking about the 1/6 scale printers when I uploaded this, so it is not cut up and will only fit on a build area 300mmx300mmx300m or more unless you scale it down.
I...
This represents the final poll in this set. Please cast your vote below!
We will condense the polls moving forward next month, obviously there are some items in the wrong categories - but I didn't put them there, you did :) but some of the categories are ambiguous so we will cut them into a few more generic groups after this set of Poll results.
Please vote below for your favourite misc model! All data used for this poll can be found attached to the bottom of this post.
2020-02-05 08:11:27 +0000 UTC View Post
Please make your vote below, and also be aware I was already making four of these 5 choices in preparation for the only extra Tier I ever wanted to add and thats a specific ship/starship/vehicle Tier - and I want to have an introduction model for that new tier- this is ideal. This Poll will be ramped up if the votes fall in the right places.
2020-02-05 08:01:31 +0000 UTC View Post
Please make your vote below. Data used to create this poll can be found attached at the bottom of this post.
2020-02-05 07:52:07 +0000 UTC View Post
Please vote below, data used for this poll can be found attached at the bottom.
This is a repost as I didnt put an expiry on the old one.
Please find the poll and vote below. Data used to form this poll can be found attached at the bottom of this post.
2020-02-05 06:30:40 +0000 UTC View Post
Please find the poll for cosplay items for January below. The poll runs for a week and is based on the member data which can be found attached to the bottom of this post.
2020-02-05 06:05:03 +0000 UTC View Post