Jokers Hand
Added 2020-04-12 16:52:13 +0000 UTC*No supports required for the hands or the card
Have included 2 versions, one for the printed card and another with a cutout for a real card (much thinner cutout) should hold a few cards and of course included the printed card.
I figured this would be a little heavy toward one side so ive put a small cutout in the base so you can put some weight in there afterward.
Batman hand will be up next as one, happy to keep doing these ones if people want them, they are much easier than doing a full body :)
Comments
im thinking of drilling in from the bottom and putting in fishing sinkers to counter balance. ill let you know how it works out. im real new to this, what slicer is everyone using? im using the factory creality slicer right now but it seems to be limited on options.
Chad Drumhiller
2020-10-29 06:32:04 +0000 UTCit is a harsh angle I won't deny, from what i've seen people are dropping in weights in the infill when they print it in the base, or use variable infill, ie really heavy infill for that much of the print then lower the infill % for the hand
Geoffro / Hex3D
2020-10-29 04:57:00 +0000 UTCim having a hard time getting this to stand up on its own...suggestions?
Chad Drumhiller
2020-10-29 04:55:31 +0000 UTC
