Greetings!
Some work-in-progress screenshots of the upcoming "Trolls v2" release.
Septembers release will include 20+ STLs (click to see references):
1. wc3 Vol'Jin -at least 3 poses + Bust -WIP
2. 2023-08-26 07:46:00 +0000 UTC
View Post
Greetings guys! I am excited to present to you our new 6-month loyalty reward!
Magtheridon (on 75mm base), the former Lord of Outland, is a pit lord who conquered the ruins of the 2023-08-22 09:05:47 +0000 UTC View Post
Hello guys!
This August release "Knights of Lordaeron" printed on Anycubic Photon Mono 0.05mm layer + grey primer.
As always happy printing and thank you for your support!
2023-08-14 12:21:16 +0000 UTC View PostHello guys! I am finished with test-printing!
Models are ready for download!
All 24+ models were successfully test-printed (A bit later I will post printed photos- for now I got little assemble video see P.S.3. below ).
"Knights of Lordaeron" Release download link: 2023-08-11 08:48:36 +0000 UTC
View Post
Voting results - "Trolls v2" won with 35% of total votes, anyone that voted for Dracthyr (second place with 34%), please don't be upset as we will sculpt them anyway (some other month) and I will make sure Troll v2 release will be an amazing one (though, I am not sure it can overshoot this month's release with Arthas and his father ;)).
Thanks to everyone who parti...
Greetings!
I am happy to present RENDERS of 24+ new models from the "Knights of Lordaeron" release. I did my best and hope you will like this release (all pre-supported 32mm scale).
230801-BUST-Paladin (Arthas)
230802-Paladin_Standing (Arthas) - weapon swap option (glue magnet)...
Hey guys!
Let's vote for the September theme, which is Horde theme month.
For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months, so September will be dedicated to the Horde, and October - to the Dungeon).
Please vote until August 10th on the following topics
(refer to the image for an example...
Greetings!
Some work-in-progress screenshots of the upcoming "Lordaeron Knights" release.
August release will include 16+ STLs (click to see references):
1. Arthas Human Paladin (before turning Evil) -at least 3 poses + Bust
2. 2023-07-25 08:44:35 +0000 UTC
View Post
Greetings guys! I am excited to present to you our new 3-month loyalty reward!
Lord Kazzak (on 50mm base) - a battle-hardened doomlord and commander of the Burning Legion forces. After the Third War, Lor...
2023-07-23 13:19:26 +0000 UTC View Post
Hello guys!
This July release "Karazhan Part1" printed on Anycubic Photon Mono 0.05mm layer.
As always happy printing and thank you for your support!
2023-07-17 12:35:24 +0000 UTC View PostHello guys! I am finished with test-printing!
Models are ready for download!
All 18+ models were successfully test-printed (A bit later I will post printed photos).
"Karazhan Part1" Release download link: 2023-07-11 08:33:18 +0000 UTC
View Post
Voting results - "Lordaeron" won by taking 49% of total votes!
Thanks to everyone who participated in voting and left their suggestions in the comments below.
Lordaeron release will include:
1. Arthas Human Paladin (before turning Evil) -at least 3 poses + Bust
2...
Greetings!
I am happy to present RENDERS of 18+ new models from the "Karazhan part1" release. I did my best and hope you will like this release (all pre-supported 32mm scale).
230701-Hell_Hound
230702-Hell_Hound_Attack
230703-Huntsman_attack
230704-Huntsman_on_HORSE (Horse prints separately)
230705-Undead_Ro...
Hey guys!
Let's vote for the August theme, which is Alliance theme month.
For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months, so September will be dedicated to the Horde, and October - to the Dungeon).
Please vote until July 10th on the following topics
(refer to the image for an example
2023-07-03 07:28:22 +0000 UTC
View Post
Greetings!
Some work-in-progress screenshots of the upcoming "Karazhan Part1" release.
July release will include 20+ STLs (click to see references):
1. Rokad the Ravager
2. 2023-06-27 17:48:59 +0000 UTC
View Post
Hello guys!
This June release "Undeads v2" is printed on Anycubic Photon Mono 0.05mm layer.
As always happy printing and thank you for your support!
2023-06-16 07:20:12 +0000 UTC View PostHello guys! I am finished with test-printing!
Models are ready for download!
All 25 models were successfully test-printed (A bit later I will post printed photos).
"Undeads v2" Release download link: click<...
Voting results - "Karazhan" won by taking 35% of total votes!
Thanks to everyone who participated in voting and left their suggestions in the comments below.
First part of Karazhan will include:
1. 2023-06-11 07:57:41 +0000 UTC
View Post
Greetings guys!
I am happy to present RENDERS of 25+ new models from the "Undeads v2" release. I did my best and hope you will like this release (all pre-supported 32mm scale).
230601-Undead_female_mage_cast
230602-Undead_female_Mage
230603-Undead_Fem_Priest_cast
230604-Undead_FeM_Priest
230605-Undead_Mage_s...
Greetings!
Let's vote for the July theme, which is Dungeon/raid theme month.
For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months, so July will be dedicated to the Dungeon, and August - to the Alliance, September to the Horde).
Please vote until June 10th on the following topic...
2023-06-03 08:35:31 +0000 UTC View Post
Greetings!
Some work-in-progress screenshots of the upcoming Undeads v2 release.
June release will include 25+ STLs (click to see references):
1. Starting gear Undeads (male/female) mage/priest at least 9 models (female model no images)
2. w3 style
2023-05-26 10:23:17 +0000 UTC
View Post
Hello guys!
This May release "Dwarfs v2" is printed on Anycubic Photon Mono 0.05mm layer.
As always happy printing and thank you for your support!
2023-05-19 12:02:07 +0000 UTC View PostHello guys! Finally I am finished with test-printing!
Models are ready for download!
All 26 models were successfully test-printed (A bit later I will post printed photos).
"Dwarfs v2" Release download link: ...
Greetings!
Voting results - "Undeads v2" won by taking 55% of total votes!
Thanks to everyone who participated in June's voting and left their suggestions in the comments below.
June release will include 20+ STLs (click to see references):
1. Star...
2023-05-12 09:01:27 +0000 UTC View Post
Greetings guys!
I am happy to present RENDERS of 26+ new models from the "Dwarf v2" release. I did my best and hope you will like this release (all pre-supported 32mm scale).
230501-Flying_machine (wings and propeller prints separately and can change position of wings and switch propellers)
230502-03-Dwarf Female_war...
Hey guys!
Let's vote for the June theme, which is Horde theme month.
For those that joined recently - we are mixing main themes - Alliance, Horde, and Dungeon months, so June will be dedicated to the Horde, and July - to the Dungeon).
Please vote until May 12th on the following topics
(refer to the image for an example).
Greetings!
Some work-in-progress screenshots of the upcoming Dwarves v2 release.
April release will include 25+ STLs (click to see references):
1. Flying machine (wings can be set in two positions-prints separately) -it will stand on a rod (that you can print in clear resin) so it will look like it is flying
2. Starting gear Dwarf male/female (no pictures for now)
3. Her...
Hello guys!
This April release "Scarlet Monastery" is printed on Anycubic Photon Mono 0.05mm layer.
As always happy printing and thank you for your support!
2023-04-19 07:01:21 +0000 UTC View PostHello guys! Finally I am finished with test-printing!
Models are ready for download!
All 23+ models were successfully test-printed (A bit later I will post printed photos).
"Scarlet Monastery" Release download link:
Greetings!
Voting results - "Dwarves v2" won by taking 39% of the votes!
Thanks to everyone who participated in March's voting and left their suggestions in the comments below, I see March's release as a great one!
May release will include 20+ STLs (click to see references):
1. Starting gear (male/female) at least 8 models
2. w3 2023-04-12 12:12:30 +0000 UTC
View Post