Touch Pad V1
Everything is packed in the archive : 3D STL and STEP files, pictures, shopping list.
2025-12-23 20:18:04 +0000 UTC View Post
The Lebois Racing posts
Merry Christmas !
I would have loved to wrap up the year with a big update — something bold, something with real punch. Unfortunately, I’m still missing a bit of time before I can share news about the major projects. Things have clearly slowed down lately, but at least I’ve found a good balance in my life, and that’s what really matters for the long-term sustainability of these projects.
In the mea...
2025-12-23 20:16:48 +0000 UTC View PostSRT Gearbox : eclutch update
The automatic eClutch calibration caused more problems than it solved, so I’ve added a manual calibration procedure directly integrated into the main firmware!
No more flashing a different code, no need to open the Serial Monitor or type any commands.
Here’s how it works (once the new firmware is flashed):
Engage 3rd gear, pre...
2025-11-02 10:07:05 +0000 UTC View Post
SRT Gearbox : August Update and news
This month, it’s a minor update, which doesn’t really reflect the mountain of work completed over the summer.
The update boils down to:
No Turn fix: the upper bearing lip (highlighted in blue on the image) had been missing since the last update. If your gearbox is already printed, you can replace this lip with an M5 washer.
Seq holder...
2025-08-23 06:13:47 +0000 UTC View Post
Hello drivers !
---- PCB V1.3 ----
Many of you have complained about having to change the PCB. I'm sorry the first version wasn't entirely satisfactory. I remind you that the latency is really minimal; owners of PCB V1.2 who don't plan on using sequential mode should try it out to decide whether to upgrade to V1.3.
Finally, I'm offering all PRO contributors with more than three months of contributi...
2025-06-01 06:45:04 +0000 UTC View PostSRT Gearbox : April Update
The April update is available! New PCB (v1.3), new firmware, 3D fixes, everything is detailed on the site:
https://lebois-racing.com/srt-gearbox-april-update/
2025-04-06 07:45:20 +0000 UTC View PostSRT Gearbox : March update!
Basically, I thought it would be a small update...
...
Not at all...
Come on, let's stick to it with a nice clean log that no one will say boooouuuuu it's not clear
The main subject of this update is the sequential. We keep the idea of the previous update: a single switch, and a longer stroke. On the other hand, we change the switch, we need these roller switches w...
2025-03-10 06:11:51 +0000 UTC View PostSRT Gearbox : January update!
Here we are in 2025 and the 4th monthly update of the SRT V10 is online!
As you probably know if you follow me on Facebook or Insta, the second tiny driver has arrived in the family. I would like to tell you that it is getting harder and harder to work. It's true.... at the same time it's been like that for so long... The almost good news is that I am starting to have a functional worksho...
2025-01-11 22:17:23 +0000 UTC View PostSRT Gearbox : Décember update!
Here’s a new batch of fixes and optimizations for the final month of 2024!
Another very busy month... maybe too busy... As you know, we had to temporarily pause the store to reorganize. So, Max and I are both handling separate projects at the same time—Max is preparing his new workshop for processing orders, and I’m setting up a showroom and a space to test prototypes.
Still, ...
2024-12-06 20:25:31 +0000 UTC View PostSRT Gearbox: November update!
That's it, I moved! Well for the moment it's the construction site... I thought the workshop would be operational quickly, I realize that it's quite the opposite! So in the meantime I received permission from my wife to spread out a little everywhere in the house, developments are resuming. What a pleasure to bring together again under the same roof the simulator, the machines and the CAD works...
2024-11-06 20:20:37 +0000 UTC View PostSRT Gearbox : October Update !
The first gearboxes are assembled, and the first feedback is very positive. However, you have reported some problems that this update fixes.
1. New slider
The biggest problem encountered concerns the tracks: they ultimately do not stay in place in the slider… the tolerances being too variable from one printer to another, the current solution cannot be retained.
Many o...
2024-10-03 05:34:38 +0000 UTC View PostUPDATE: The 3D files have been updated on the site:
- added files for the button plate mod
- body2 and servo support fix for the RHD mod
- added RHD logo on the parts for the RHD mod
- added a mount for the handbrake mod on body1
- added the mounting plate for the handbrake mod
- added the complete step files for creators
On the I&C side, the first kits have been shipped: 2024-09-08 08:48:14 +0000 UTC
View Post
The V10 is alive !!!
I really hope that you will like the new improvements.
Just few of them :
Auto-calibrating eclutch
Single magnet design
Integrated hall sensors
Complete documentation : https://lebois-racing.com/srt-gearbox-v10-documentation/
No...
2024-08-31 13:51:45 +0000 UTC View Post✨ Promo codes for PRO and ELITE contributors ! ✨
🔹 keeppushingpro: €10 reduction from €100 of purchase
🔹 alwaysontoppro: €30 reduction from €400 of purchase
Enjoy !!!🎉
2024-08-25 15:14:48 +0000 UTC View Post✨ Great News ! ✨
Hello drivers ! 🏁
We are super exited to announce our new store : www.lebois-racing-store.fr/en/ 🎉 A new space dedicated to all those who seek to scratch those precious seconds per lap and to refine their sim racing setup!
To celebrate this together, we have prepared two promo codes in limited quanti...
The V10: when?
Bad news: I'm off on vacation soon... yes, how awful... Well, we'll console ourselves by remembering that the V9 was designed while I was on vacation, proof that it's not a sandy beach that's likely to put the brakes on developments.
Here's where we stand:
1) All the principles have been validated for some time. The gearbox is reliable, and adjustments are made at the margins to o...
HSS mod canceled
Further to the previous survey, I hereby announce the cancellation of the HSS mod. The documentation will soon disappear from the site.
Please contact me on Etsy to request a refund for the V1 HSS PCB.
I'm taking this opportunity to destock the new PCBs that will no longer be used:
Should the HSS mod be cancelled?
As you're probably aware, the HSS mod was quickly found to have a fault when it was released over two months ago: the gears don't shift fast enough, if at all.
So for over two months now, I've been multiplying prototypes to remedy the problem. As my tests have progressed, I've gained a better understanding of the problem, and I've come to the following conclusions:
1) the magnet's...
2024-05-22 12:48:17 +0000 UTC View PostNew firmware for the Smart Control Box on the P1 harness tensioner!
The new code is derived from the GForce:
Faster execution times for a more accurate experience
Improved communication with Simhub
More complete status messages
Stand-alone code: can be loaded with any Arduino IDE
Please note that the code to be entered in “custom protocol” is diffe...
2024-05-11 06:44:34 +0000 UTC View PostMOD HSS: news from the front line
Time passes at a frightening speed. One day, you launch a mod and a piece of shit appears. We tell ourselves it's just a question of adjustment.
And two months later, it's still not fixed. I received the latest version of the PCB two weeks ago. I must have tested a dozen sliders with various magnet configurations.
It's better, but still not perfect.
So here it is, for those...
2024-04-26 13:55:21 +0000 UTC View PostRC 13 firmware for the SRT gearbox: the code of maturity
Maturity! A big word indeed!
The V9.1 gearbox is getting old. The community has grown, and so have I. I've been able to observe which mods were used, which were usable, which were unusable.
When I recently reworked the code to make it lighter, I became aware of a few things:
1) Some mods are too complex to be used, like the pedal mod with ADS1105...
2) Some parts of the ...
2024-04-01 13:18:31 +0000 UTC View PostSRT80 V2
V2 ? Let's calm down right away: it's mainly additional files:
addition of two motor mounts with integrated fixed bearing
addition of a linear bearing mount with "compact" easy mount
addition of an updated slider for raw aluminum profiles delivered a few months ago.
As usual, available on : 2024-03-29 20:42:24 +0000 UTC View Post
End of HSS V1.0
Ok, so I've worked hard those last days trying to fix the issue mentioned earlier. At this point, it seems clear to me that the magnet should be as close as possible to the sensor, and as small as possible.
I took it as an opportunity to work again on the sequential behavior that deserves a better treatment, and those tests helped me to understand what we need to do to make it great.
<... 2024-03-25 19:02:26 +0000 UTC View PostMod HSS
I did many tests with 8mm and 6mm magnets but it wasn't conclusive.
I'll get 4mm magnets this week-end, I hope that it will fix things.
2024-03-21 19:56:04 +0000 UTC View PostHouston we have a problem
It seems that I've sunned by overconfidence. As highlighted by FredyP on Discord (whom I thank), when shifting gears quickly, the HSS mod doesn't respond fast enough.
I've been looking into the problem since Saturday and hope to come up with a solution as quickly as possible. By modifying the code to gain speed, and adjusting the position of the magnet in relation to the PCB, we should be...
2024-03-18 14:36:18 +0000 UTC View PostMinor fix
The wiring solution was missing on body2. It's fixed now for both LHD and RHD versions :
https://lebois-racing.com/exclusive-files-for-pro-and-elite-patreons/
RHD mod now compatible with HSS
As requested, I added body 2 and slider with Hall Sensor Sequential and Right Hand Drive mods. Files are as usal located on the website :
https://lebois-racing.com/exclusive-files-for-pro-and-elite-patreons/
Please also note that the required PCB is out of stock. Second batch ...
The new mod: Hall Sensor Sequential
Here's the mod that corrects one of V9.1's biggest flaws: the sequential sensors.
It replaces the switches that tended to break with non-contact Hall sensors.
You'll need to reprint body2 and the slider.
The PCB can be ordered here: https://www.etsy...
2024-03-02 16:08:12 +0000 UTC View PostNew mod for the V9.1
A new mod is on the way for the V9.1 gearbox!
I'll let you know what it is shortly, but for those of you printing, the body2 and slider for this mod will be different.
The current shopping list remains unchanged.
I hope to release the mod in less than two weeks.
See you soon!
2024-02-21 08:25:15 +0000 UTC View Post